Sketch of horizontal fence boards and joinery

Horizontal Fence Cost: What You’ll Pay per Foot in 2026

Most horizontal wood fences cost between $25 and $75 per linear foot installed, and a middle-of-the-road cedar fence tends to land around $45 to $60. For a typical 100- to 150-foot backyard, that puts the total somewhere between roughly $2,000 and $12,000, depending on wood species, height, gates and how hard your site is to build on. Below is how those numbers break down, why horizontal costs more than a standard vertical fence, and how to compare quotes so you are pricing the same fence every time.

Actionfenceanddeck
Plan a Fence That Fits Your Budget
Action Fence and Deck builds custom wood fencing with eco-friendly materials and offers quotes to help homeowners plan their project.

Explore fencing options

TL;DR

  • Expect about $25 to $75 per linear foot installed for a horizontal wood privacy fence, with many standard projects near $45 per foot, according to a 2026 U.S. cost guide.
  • Horizontal runs higher than vertical because it uses more lumber, heavier rails, more hardware and more careful labor.
  • Wood species is the biggest lever: treated pine sits at the low end, cedar in the middle, hardwoods like ipe at the top.
  • Gates, old-fence removal, slopes and stain are the line items that most often turn a tidy quote into a surprise.
  • Ask every contractor for the same specs in writing so the numbers can be compared fairly.

Table of Contents

What a horizontal fence costs per linear foot

Per-foot pricing is how nearly every fence contractor quotes, so it is the best place to start. Published U.S. figures vary because they measure different things: some count only a basic build, others include stain, gates or premium lumber.

Here is how the ranges from published 2026 guides line up:

Source Horizontal fence price per linear foot, installed
The Spruce $50 to $70, averaging about $60
Latest Cost $25 to $75, with many projects near $45
Fence Advisors $25 to $40 for treated pine, $60 to $90 for ipe and other hardwoods

The spread looks wide, but it makes sense once you separate by material. A pressure-treated pine horizontal fence is the budget build. Cedar, the most common choice for a visible privacy fence, usually lands in the middle. Exotic hardwoods and composite slat systems sit at the top.

For comparison, a general fence-cost calculator for Texas puts all fence types, from chain link to composite, at roughly $14 to $51 per linear foot, with Texas building costs running somewhat below the national average. Horizontal wood privacy fences sit toward the upper part of that range because of the extra material and labor covered below.

What a horizontal fence costs per linear foot

What that means for a whole yard

Multiply your fence length by the per-foot price, then add the extras. A few worked examples using the mid-range figures above:

  • 80 feet at $45 per foot: about $3,600 before gates and removal.
  • 120 feet at $60 per foot: about $7,200.
  • 150 feet at $70 per foot: about $10,500.

One guide to horizontal slat fences reports that a standard 60- to 80-foot install often falls around $4,500 to $6,500 in total, which is consistent with the math above. Treat all of these as planning numbers. Your real price comes from a measured, written quote.

What drives the price up or down

Two fences with the same length can differ by thousands of dollars. These are the factors that do it.

Wood species and board grade

Material is the largest single swing. Treated pine is the cheapest option, cedar costs more but resists rot and looks better with a clear or semi-transparent finish, and hardwoods cost the most. One published breakdown puts horizontal material costs (boards, posts, rails and caps) in a broad band of $6 to $25 per linear foot, depending on the species or composite you pick.

Grade matters more on a horizontal fence than a vertical one. Because the long boards are the finished face, knots, cupping and twisting show across every span. Better-grade lumber costs more up front, and it is usually the right place to spend if you want the fence to still look straight in ten years.

Height

Most residential privacy fences are 6 feet tall. Going taller adds boards, taller posts and more concrete. In Fort Worth, the city’s permitting page says building permits are required for solid fences above 7 feet, so a taller fence adds both material and paperwork. The same page limits front-yard fences to 4 feet and open picket style, so a horizontal privacy fence is a backyard and side-yard project in most cases.

Post spacing and structure

Horizontal boards span between posts, so they sag or bow if the spacing is too wide for the board thickness. Most builders keep posts at 6 to 8 feet on center, and some guides note that about 6 feet or less is common for horizontal designs, though it is not a universal rule. Tighter spacing means more posts and more concrete, which raises cost but protects the fence. Our guide to fence post spacing explains how to set it without a leaning fence.

Board spacing and privacy level

A tight, gap-free horizontal fence uses more boards per foot than one with intentional gaps for airflow or a lighter look. Tighter spacing adds material expense, and spacing also changes installation time. If full privacy is the goal, plan for the higher board count. If you want a modern slatted look with some light passing through, you may save a little.

If privacy is the main reason you are building, it is worth looking at how privacy screen options combine fencing with plantings and other features, since the right mix can change how much fence you actually need.

Site conditions

Slopes, rocky or clay-heavy soil, tight access for equipment and buried obstacles all slow the crew. Steeper grades need stepped or racked horizontal runs, which cost more labor. North Texas clay soil is a common reason posts need deeper or wider holes, so ask your contractor how they plan to set posts on your lot.

Why horizontal costs more than vertical

The short answer: more wood and more time. A horizontal design needs sturdier posts and rails to carry the boards, extra fasteners, and boards that are individually leveled as they go up.

Published comparisons back this up. One 2026 guide estimates that a 200-foot horizontal project often runs $5,000 to $8,000, versus $4,000 to $6,000 for a vertical fence of similar size. That is roughly a 20 to 35 percent premium in those examples.

Cost ranges for 200-foot horizontal and vertical fences

Some of that premium is labor. Installation labor for horizontal fences is commonly quoted between $8 and $30 per linear foot, and it climbs with terrain and weather. If you want to see how contractors scope labor and what affects installation complexity, this step-by-step fence installation walkthrough shows the sequence that crews follow.

The premium buys you a clean, modern look that many homeowners prefer. If you are still deciding on style, our comparison of horizontal vs. vertical fences covers the trade-offs beyond price.

The costs people forget to budget

The per-foot number rarely tells the whole story. Build these into your estimate:

  • Gates. Gates are usually priced separately from the fence run, and a horizontal gate needs a stiffer frame to keep long boards from sagging. Our guide to gate repair costs shows what hardware problems cost down the road, which is a good reason to spec the gate well the first time.
  • Removing the old fence. Demolition and disposal commonly run $3 to $10 per linear foot, depending on material, buried concrete and hauling distance.
  • Permits and a property survey. Fort Worth requires that permit applicants be a registered building contractor or meet homestead requirements, per the city’s residential permitting page. Also check your HOA rules before choosing a style.
  • Site prep. Clearing brush, grading and dealing with stumps may or may not be in the quote. Ask.
  • Stain or sealer. Cedar looks best with a finish. Pre-stained boards cost more up front but save a weekend of work.
  • Hardware. Stainless or coated screws, concrete and brackets add up on a long run, and cheap fasteners are a common cause of rust streaks.

A good rule: compare whether each estimate includes post concrete, fasteners, stain, demolition, delivery and gate hardware. If one bid is $1,500 cheaper than the rest, one of those items is usually missing.

How long a horizontal fence takes

For a mid-size residential yard, a horizontal fence typically takes one to three days to build, longer if the terrain is complex or hardscaping is involved. Material lead times and permit approval can add days or weeks before the crew arrives, so plan ahead if you want it done before a specific event or season.

Perspective: where we think the money should go

After more than 20 years building fences, we see the same pattern: the cheapest horizontal fence is rarely the cheapest fence to own. Horizontal boards are the finished face, so every cup, twist and sag is visible from the street. We would rather put the budget into good lumber, tight post spacing and solid fasteners than into extra length or fancy trim.

Our approach is to tailor the fence to your yard and your budget, not to sell one spec to everyone. That means walking the property, talking through species, height and gap spacing, and writing a clear quote so you can see where each dollar goes. We favor sustainable materials and techniques where they fit the job, and we build as licensed and insured professionals.

If you are weighing a horizontal fence, ask every contractor you meet for the same written scope. A transparent quote is the best sign the finished fence will match what you were promised.

Abraham

How to compare horizontal fence quotes

Use this short checklist when bids come in:

  1. Same footage and height. Confirm each bid uses your measured length and the same fence height.
  2. Same wood and grade. “Cedar” can mean very different boards. Ask for species, grade and board thickness.
  3. Post details. Ask for post size, spacing and how deep and in what material they are set.
  4. Hardware. Ask what fasteners and gate hardware are included.
  5. Extras in writing. Gates, removal, stain, permits and haul-away should each be listed or marked as excluded.
  6. License and insurance. Ask for proof before you sign.
  7. Payment terms. Know the deposit, the schedule and what triggers the final payment.

Want a broader budget view before you call? Our guides on wood fence cost and fence installation cost cover the numbers that apply to any wood fence, and 10 wood fence styles can help you narrow the look.

Get a horizontal fence quote from Action Fence and Deck

We build custom wood fences, gates, decks, retaining walls and concrete work for homeowners and businesses in the Fort Worth and Dallas-Fort Worth area. Every project starts with a free quote, so you see transparent pricing and get straight advice on species, spacing and layout before you commit.

Actionfenceanddeck

To talk through your yard, see our fencing and gate services or visit Action Fence and Deck to request your free estimate.

FAQ

How much does it cost to build a horizontal fence?

Plan on about $25 to $75 per linear foot installed for wood, with many standard projects near $45 per foot. A 100- to 150-foot privacy fence commonly totals somewhere between $2,000 and $12,000, according to a 2026 price guide. Wood type, height, gates and removal of an old fence decide where you land.

Is a horizontal fence more expensive than a vertical fence?

Usually yes, when both use the same material. Horizontal designs need more lumber, sturdier rails, extra hardware and slower, more careful labor. Published comparisons show a premium on the order of 20 to 35 percent, though your own quote is the number that counts.

How much spacing should there be between horizontal fence boards?

For full privacy, boards are set tight with only a small expansion gap. Wider gaps give airflow and a lighter look but reduce privacy. Because spacing changes the board count, it also changes material cost, so decide this before you request quotes.

Is a 4-foot fence cheaper than a 6-foot fence?

Generally yes, because it uses fewer boards, shorter posts and less concrete. The savings are not strictly proportional, since labor, post setting and gate hardware stay close to the same. In Fort Worth, front-yard fences are also limited to 4 feet and open picket style, per the city’s permitting page.

Sources

Leave a Comment

Your email address will not be published. Required fields are marked *